Q&A with Atlas Copco’s Portable Energy Division

By Dale Benton
Mining Globalspeaks with Paul Humphreys, Vice President of Communications Atlas Copcos Portable Energy Division about how sustainable productivity is es...

Mining Global speaks with Paul Humphreys, Vice President of Communications Atlas Copco’s Portable Energy Division about how sustainable productivity is essential for the industry in becoming increasingly competitive

 

What is Atlas Copco’s commitment to ‘sustainable productivity’?

Within Atlas Copco we stand by our responsibilities towards our customers, towards the environment and the people around us. We strive for performance levels that stand the test of time. This is what we call sustainable productivity

For Atlas Copco’s Portable Energy division, which provides generators, compressors, light towers and pumps to the mining industry, this transfers to our forward-thinking approach. Creating customer value is all about anticipating and exceeding their future needs – while never compromising our environmental principles. Looking ahead and staying ahead is the only way we can ensure we are a long-term partner for our customers.

 

How does that affect the mining sector in practical terms?

Reliability is of utmost importance in this industry.  Mining can involve a complicated set of applications that require very high standards in terms of safety, productivity and sustainability. Therefore, equipment needs to be robust, dependable and safe. However, sustainable productivity is also vital as the industry is becoming increasingly competitive.  Atlas Copco meets all of these criteria.  Stemming from our close relationship with the mining industry, which stretches back over 100 years, we have learned a great deal about the design, construction and support of our equipment onsite. Today all of our generators, light towers, compressors and pumps are engineered for these stringent demands, often in harsh climates.

Mining is diverse. The requirements of the products will depend largely on whether a customer is working below ground or above ground.

When working below ground, highly stringent safety regulations need to be borne in mind. Electrical equipment is often used to eliminate the need for transporting and transferring high volumes of fuel in sensitive areas. Often, the equipment is used in a semi-permanent manner. Being in place for considerable periods means portability is less important but longer service intervals are a necessity. To give an example of how portable energy equipment is used below ground, a compressor can be deployed as a universal power source but would often be specifically used for drilling smaller holes into which explosives are placed for clearing.

Working above ground, compressors would be much larger due to the need to drill much wider holes at depths of over 100 metres. These compressors are typically reliant upon diesel due to the difficulties in accessing any other power source in remote mining locations. Despite the size of these compressors, it is still very important that they can be easily transported between sites. A compressor used for drilling applications should fit on the same truck as the drill mechanism.

Examples?

Two examples of ‘sustainable productivity’ in action can be found in compressors for exploration drilling and also in light towers.

Compressors

In exploration drilling, it is vital to select the right compressor for the particular job, so that performance, rate of completion and energy efficiency can be optimised. The most important factors to consider are the depth and diameter of the hole that needs to be drilled. After these two parameters have been determined, we can begin to match the requirements to the correct product. In simple terms, drills with large hammers creating deep holes, will need a more powerful compressor than a drill with a smaller hammer creating a smaller hole. In many applications, you could choose from multiple products to complete the task, but the important point is to determine which compressor can do this in the most efficient way.

Atlas Copco is developing a full range of compressors known as the DrillAir range, specifically designed to cover a multitude of drilling applications. The DrillAir range is built scientifically around the principals of pressure and flow. The focus of the design is the relationship between these two variables and for the compressor to find the right combination for the application. This improves the efficiency aspects of time spent on the job and fuel consumed. With the DrillAir range, it is possible to achieve the maximum air flow at any pressure setting.

Light towers

 

We strongly believe LED will be the ‘normal’ light source in all regions of the world. It’s a lighting source that is better for your business and better for the environment too. The way we have looked at and approached LED technology is a good example of why Atlas Copco, in 2016, was recognised as the world’s most sustainable machinery company by the prestigious annual Global 100 list. This is the tenth time we have appeared on this list.

With our HiLight range, we have invested time, effort and capital in developing a solution that goes above and beyond satisfying our customers’ expectations. A weakness in some of the current LED offerings on the market is the low light coverage. Our belief in improving technology drove us to do a deep analysis of this technology. It took just about two years to design and perfect our vision.

What is Atlas Copco’s outlook on the mining industry?

Mining has had a tough time over the last several years, largely driven by weaker commodity prices and demand.  It’s a huge business and very diverse, so certain segments have been affected more severely than others. However, mining is, by definition, a cyclical business.  As supply dries up and demand continues to grow, investment will be needed in the future. Many of the minerals mined are so important to everything we do in life and we feel the consumption of such materials will only increase. We definitely will see a recovery in the sector although maybe not as rapid as the growth that has occurred previously. We also see that the requirements of the industry have shifted to some extent, with any different factors becoming more important, such as sustainability and productivity.

How important will ‘sustainable productivity’ be to the future of the mining industry?

The terms sustainability and competiveness go hand-in hand. We believe that you simply cannot have one without the other. The mining industry shares this approach.

 

The October issue of Mining Global Magazine is live!

Follow @MiningGlobal

Get in touch with our editor Dale Benton at [email protected]

Share

Featured Articles

Laws Thwart US Bid to Match China on Lithium Mining

US bid to increase domestic production of lithium in order to reduce reliance on Chinese supplies of critical mineral frustrated by 'confusing' state laws

Bain: 'Inflation Dampening Mining Leaders' Net Zero Hopes'

Bain & Company’s annual Energy & Natural Resource Executive Survey shows 62% of energy execs say high costs mean net zero goals won't be met by 2060

Focus on: Lithium – ‘White Gold’ Driving the EV Revolution

Because of the move to electric vehicles, the metal lithium is rapidly becoming a vitally important part of world’s bid to move away from fossil fuels

Aluminium Industry Calls for new North America Body

Supply Chain & Operations

Data-Driven ABB Smart Hoisting Solution 'is Safety Boon'

Digital Mining

Deep Sea EV Metals Mining Firm in Greenpeace Clash

Sustainability